52 Pickup®
Flowable Charcoal Deactivator
52 Pickup is a flowable activated carbon especially effective in protecting or remediation areas where herbicides or oils have been spilled or over applied.
Directions for Use
Spills: Apply 32 to 64 oz. per 1000 square feet of contaminated area. If spill is severe, apply full strength and wash into soil and root zone area 4-6 inches deep.
Deactivating Turf Herbicides: Apply 32 to 64 oz. in sufficient water for good distribution per 1,000 square feet of area.
Ball White™
Ball White is a highly concentrated golf ball washing compound formulated using Pine Oil, a natural disinfectant to prevent fouling of the liquid. Ball White preserves ball luster and easily removes grass and dirt stains.
Directions for Use
Use 1 to 2 ounces of Ball White directly in ball washer and fill unit with water. When making a pre-mix solution, use 1 part of Ball White to 10 to 12 ounces of water.
Clean Foot
Dye Removing Hand Cleaner
Rub a small amount onto dry stained hands. During the process of massaging onto hands, add a few drops of water to activate Clean Foot. Once dyes thoroughly liquefy from the skin, rinse with plenty of water and dry skin thoroughly.
Clean Foot, containing a special reducing agent that converts dyes into colorless liquid, removes dye stains from skin resulting from the use of spray pattern indicators.
H.O.S.E.
Hydraulic Oil Spill Emulsifier
Designed for use when hydraulic equipment spills or leaks of oil products such as hydraulic oil, motor oil, or transmission fluid, H.O.S.E. works by totally emulsifying hydrocarbons, breaking them into small droplets, and encapsulating them in water.
Directions for Use
Use product undiluted. With a sprayer, soak the oil spill very thoroughly. Let stand for 5 minutes; then flush with plenty of water with moderate pressure.
Neutra Clean
Spray Tank Cleaner
Neutra Clean emulsifies and suspends spray tank residues so that they may be removed from the interior of spray equipment. Neutra Clean has built-in water softeners.
Directions for Use
Use 1 quart per 100 gallons of water. Circulate or agitate tank for 5 minutes, then flush solution through the pump and discharge lines. After discharge, thoroughly rinse interior of tank with clear water and rinse again.